ANALISIS KEKUATAN HASIL SAMBUNGAN SINGLE LAP JOINT DENGAN ALAT BANTU STAND RIVET

PATREGA, ELSAN (2018) ANALISIS KEKUATAN HASIL SAMBUNGAN SINGLE LAP JOINT DENGAN ALAT BANTU STAND RIVET. Skripsi thesis, Institut Teknologi Dirgantara Adisutjipto.

	Text (ABSTRAK) 13050046_ABSTRAK.pdf Download (267kB)
	Text (BAB I) 13050046_BAB I.pdf Download (138kB)
	Text (DAFTAR PUSTAKA) 13050046_DAFTAR PUSTAKA.pdf Download (34kB)
	Text (FULL SKRIPSI) 13050046_.pdf Restricted to Repository staff only Download (34kB)

Abstract

The process of riveting on aircraft materials does not always go smoothly. Some damage often occurs during rivet installation due to several factors such as differences in riveting time. This results in the frequent occurrence of remove of bad rivets. If frequent damage occurs then the repair or repair process will take time to repair. From that case it is necessary to analyze the connection quality of the rivet process. The riveting process is done with the help of the stand rivet to replace human power so that the force or pressure during the riveting process is the same bias. Furthermore, the results of riveting in testing tensile and macro photo testing. This research is focused on analyzing the quality of single joint join rivet joint with riveting process which varied the perivetan time. The method used is to look at the tensile yield of the tensile test and the result of the macro test photo of the specimen. The specimens used in this study were the 2024-T4 aluminum type and for the rivet using the universal rivet 2117 type. The test result shows that the quality of the most optimum connection is in connection C that is the intensity of riveting for 5 seconds with the result of tensile test of 2077.6 Mpa. and seen from the macro structure specimen C is the best between the comparison. For the results of vibration readings during the riveting process takes place the longer the process of vibration riveting that occurs the greater.

Actions (login required)

View Item

Downloads