DESAIN AWAL DRONE PAINTER

PINEM, ALPANDI (2023) DESAIN AWAL DRONE PAINTER. Skripsi thesis, Institut Teknologi Dirgantara Adisutjipto.

	Text (ABSTRAK) 17050045_ABSTRAK.pdf Download (331kB)
	Text (BAB I) 17050045_BAB 1.pdf Download (983kB)
	Text (DAFTAR PUSTAKA) 17050045_DAFTAR PUSTAKA.pdf Download (354kB)
	Text (FULL SKRIPSI) 17050045.pdf Restricted to Repository staff only Download (3MB)

Abstract

A drone is a vehicle that is shaped like an airplane or helicopter that can operate in the air, land and even at sea and is operated without using a crew or pilot. In contrast to airplanes where the pilot is in the cabin, the drone pilot remains on the ground and only controls the drone with remote control facilities. Therefore the author wants to design a ''DRONE PAINTER'' which can replace this job, where the drone to be designed can do direct painting which can be controlled using a remote control or planted with an autopilot system. The data collection method used in this study was to use the literature study method, the observation method and the analytical method. From the results of the analysis using ANSYS software on ANSYS flight performance, Lift 144.222 N and Drag 64.0486 N, exceeding MTOW of 79.6 N and airflow from the propeller at when cruising does not affect the nozzle to spray paint on the building. At Endurance Drone Painter the speed is 5.1 m/s with a theoretical calculation of 43.92 seconds (with a load) and 59.04 seconds (without carrying a load) while the Range Drone Painter is at a speed of 5.1 m/s with a theoretical calculation of 223.992m (with load) and 301.104m (without load).

Actions (login required)

View Item

Downloads