PERANCANGAN SISTEM PENGAMAN PINTU OTOMATIS MENGGUNAKAN PERSONAL IDENTIFICATION NUMBER (PIN) DAN TOUCH SENSOR BERBASIS MICROCONTROLLER

Kurnia Wahab, Hasbi (2022) PERANCANGAN SISTEM PENGAMAN PINTU OTOMATIS MENGGUNAKAN PERSONAL IDENTIFICATION NUMBER (PIN) DAN TOUCH SENSOR BERBASIS MICROCONTROLLER. Skripsi thesis, Institut Teknologi Dirgantara Adisutjipto.

	Text (ABSTRAK) 17010033_ABSTRAK.pdf Download (283kB)
	Text (BAB I) 17010033_BAB I.pdf Download (245kB)
	Text (DAFTAR PUSTAKA) 17010033_DAFTAR PUSTAKA.pdf Download (97kB)
	Text (FULL SKRIPSI) 17010033_compressed.pdf Restricted to Repository staff only Download (787kB)

Abstract

In an era that is developing like this, all aspects of life must also develop. A house must provide a sense of security for its owner because the house is one of the basic needs in human life. Door security is often not considered too important in today's daily life. Therefore, an automatic door safety system was made. In the security of this door system used is a selenoid door lock using a keypad and touch sensors as a controlling device. Door security uses an Arduino Uno microcontroller which is used for the main controller where the keypad functions as an input device in the form of a passcode and enters commands on the microcontroller to set the relay. This study will discuss the manufacture of a prototype automatic door security device. This door security device functions when a command is received in the form of a password via a keypad to open the door from outside the room and opens with a touch sensor to open the door from inside the room. The test results have been applied showing that the solenoid door lock will work well. The results of the touch sensor voltage test when not touched with fingers is 0V while if touched with fingers the output is 4.9V, cloth gloves are 4.77V and rubber gloves are 4.83V with a maximum distance of detecting touch is 2mm.

Actions (login required)

View Item

Downloads